Eaton Br612l125sp Main Lug Panel, 125 Amp Eaton

Eaton load center, series: br, 120/240 vac, 125 a, 1 phases, 3-wire wiring, 10 ka interrupt, main lug circuit breaker, 6 spaces, 12 circuits, 14 – 1 AWG AL/cu cable, top/bottom feed, tin plated aluminum buss bar, surface mounting, NEMA 1 indoor enclosure, 13 in overall height, 11 in overall width, 3.56 in overall depth, ansi specified, UL listed.

Single phase, 3 wire, insulated/bondable neutral, 6 (1″) spaces, 12 poles, 120/240 Volts AC. No.GBK10 ground bar and door sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when a main breaker is used or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in serviceentrance appliance. #14 – #1 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. U.L. Listed file E8741.

• Panels are supplied with split insulated neutrals with an insulated cross strap
• Separate ground bars must be used on non-service entrance panels
• For non-service entrance (sub-panel) applications, the panel may be installed with the bonding strap not connected to the neutral
• For service entrance applications, all that is required to bond the neutral is to loosen the bonding screw and the neutral screw directly beside it, insert the bonding strap into the neutral bar, and re-tighten both connections
• The insulated/bondable single/split neutral panels have sufficient terminations for both ground and neutral conductors