Danco 10881 Clear.It Water Pressure Indoor/Outdoor Drain Opener & Cleaner, Drain Clog Remover, Quick Connect to Sink Faucets & Garden 10-Ft Hose Danco

Blast away clogs with the CLEAR-IT Drain Opener and Water Jet. The CLEAR-IT Drain Opener and Water Jet is great for clog removal (no chemicals needed) and cleaning around the house. Many different uses include cleaning shoes, rinsing of a patio or deck, getting into the cracks of a sidewalk or driveway, getting under overhangs, stucco, brick, grout, and exterior windows. But it doesn’t stop there! You can clean golf clubs, cleats, sports equipment and even car detailing! The 3-in-1 faucet adapter includes a 1.8 GPM max flow dual thread aerator (Male 15/16” / Female 55/64”), Garden Hose Adapter, and Hose connector. This allows the water jet to be used with a faucet or garden hose to cover many needs. With the use of water power, this product is septic safe and non-corrosive.

BENEFITS

VARIETY OF USES

The Clear-It was originally for use as a chemical-free alternative to drain openers and more effective option than a drain snake. It still remains a great option for:

unclogging drains

cleaning shoes

decks, patios, sidewalks

driveways

exterior windows, eaves, grout

golf clubs, cleats

car detailing

and more!

NATURALLY REMOVE CLOGS

Using drain openers repeatedly can have lasting negative effects on your pipes and in some cases can cause more harm than good. Naturally removing clogs with the power of water is the an alternative solution to caring for your plumbing system, home and environment.

NON-CORROSIVE + SEPTIC SAFE

Drain clogs are inevitable and the way you get rid of them can have a long-lasting impact on your plumbing. It’s important to understand certain drain chemicals can cause expensive septic issues, while others can create corrosion in pipes. By using the power of water pressure gives you a safer alternative to using harmful chemicals.

NO TOOLS REQUIRED

Clear-It easy installation only requires alignment, twist, and tighten. Included in the package is a garden hose adapter and Male 15/16” x Female 55/64” aerator to fit most standard faucets and garden hoses.

How to Install w/ Included Faucet Aerator & Quick-Connect Adapter

STEP 1

Remove the old aerator and washer from your faucet spout. NOTE: If using an adjustable wrench or pliers, cover aerator with a cloth to prevent scratching.

STEP 2

Locate the faucet aerator (A)(included). If the faucet spout is threaded on the outside (male threads), remove the thick rubber washer (G), while leaving the thin rubber washer & disk inside the new aerator. If the faucet spout is threaded on the inside (female), do not remove washers inside the new aerator. Tighten up to ¼ turn past hand tight using pliers with a cloth to prevent scratching. NOTE: The aerator can remain permanently attached to faucet.

STEP 3

Align the tabs on quick-connector adapter (B) with “arrow” markings on aerator (A). Gently push quick-connector adapter (B) up into aerator (A). Turn counter-clockwise a quarter-turn to lock hose into place. Note: Pull or tug on quick-connector adapter (B) to ensure hose is locked in place.

STEP 4

Turn water on slowly to test for leaks. NOTE: To remove hose, turn water off at faucet source, drain remaining water in hose before storage, then gently push up on hose and turn clockwise a quarter turn to release from aerator.

FOR USE WITH FAUCETS

ATTACH

Align the arrow markings on the green hose connector with arrow markings on aerator. Gently push green hose connector up into aerator and turn to lock in place.

HOLD FIRM

Firmly grasp hose near sprayer tip and face sprayer towards sink.

SLOWLY TURN ON WATER

Slowly turn on water to test for leaks and turn off water after test. Slowly feed hose down drain until clog is reached.

BLAST AWAY!

Slowly turn on water to blast away clog. May take between 5-10 minutes to remove clog. Continue to feed hose down drain in a pull/push motion.

FOR USE WITH GARDEN HOSES

GARDEN HOSE ADAPTER

Attach garden hose adapter to the green hose, feed garden hose adapter all the way up onto the end of hose connector and lock into place.

ATTACH GARDEN HOSE

Insert black garden hose washer inside gray garden hose adapter to help prevent leaks. Thread garden hose adapter onto end of garden hose. Hand tighten only.

SLOWLY TURN ON WATER

Firmly grasp hose near sprayer tip and face sprayer away from body. Turn on water slowly to test for leaks.

BLAST AWAY!

Angle sprayer tip toward object to clean and blast away dirt and grime. Can be used for cleaning shoes, cleats, grout, sidewalks, driveways, eaves, patios, decks, exterior windows and more!

RECOMMENDED TOGETHER

The Clear-It Drain Opener Snake and Water Hose Jet is easy to install with no tools required. However, prior to installation, the removal of an existing aerator can be a hassle.

We recommend using the Multi-Use Faucet Aerator Key Tool* for assistance. Enter “B07CWM4PBX” in the search bar for more information to add to your cart!

*Sold separately*

DANCO (10909) Multi-Use Faucet Aerator Key Tool for Aerator Removal, Black

The Aerator Key removal tool is perfect to keep around the house for quick and easy aerator removal and installations to keep faucet flowing freely . Wrenches and other tools can cause damage to the housing. The rubber coat around the wrench prevents scratches or damage during aerator removal or installation.

*Sold separately*

• UNCLOGS DRAINS WITHOUT HARMFUL CHEMICALS: Blast away and drain clogs with the power of water. CLEAR-IT Water Jet Drain Clog Remover replaces your everyday tools such as a drain snake, drain snare, drain auger and pipe cleaner to unclog drains. Hook it up to your faucet or garden hose to create powerful water pressure to unclog drains or wash away slow drains naturally.
• MULTI USE FUNCTION: Great for cleaning shoes, patios, decks, sidewalks, windows, golf clubs, automotive tires, lawn mower parts, grout, outdoor grills and tools…just to name a few. Using the CLEAR.IT water drill tool will give you that extra water pressure you need for deep cleaning.
• HOW TO REPLACE: Remove your old aerator from the faucet spout and install the new aerator (included in packaging) in its place to attach sprayer. *The included aerator fits a 15/16″ outside thread and 55/64″ inside thread (27 NPT)
• MAKE SURE TO LOCK: Align tabs on quick-connector adapter with markings as guides to gently push adapter up into aerator and turn to lock hose in place with a ¼ turn to the right. **Please note while product is in use, excessive pulling on hose could cause leakage from faucet.
• *INSTALLATION REMINDER: Check to see if the THICK RUBBER WASHER provided is needed. Note: If you have a male faucet then the washer will not be needed w/ aerator. If you have a female faucet then you WILL need to insert the thick rubber washer to secure the connection and close the gap.